DEFAULT LIST RESOLUTION

Let us know what you'd like to see in the next version of SplitCam. Also if you have any idea for SplitCam Software, write about it here.
nuvolablu
User
Posts: 3
Joined: Wed Feb 16, 2011 9:39 pm

DEFAULT LIST RESOLUTION

Post by nuvolablu » Wed Feb 16, 2011 10:50 pm

resolutions:

width:
320x
512x
640x
720x
960x
1024x
1280x

height
both 16/9 and 4/3 for each resolution...
320 x (320/16*9) and 320 x (320/4*3)

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Sat Feb 19, 2011 9:03 am

Just something you should read and have a look at about what "standards aspect" ratio should be used [click here!]
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

nuvolablu
User
Posts: 3
Joined: Wed Feb 16, 2011 9:39 pm

Re: DEFAULT LIST RESOLUTION

Post by nuvolablu » Sat Feb 19, 2011 9:10 am

Fortra wrote:Just something you should read and have a look at about what "standards aspect" ratio should be used [click here!]
are you meaning that 16:9 and 4:3 are not the most common a/r used?

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Sat Feb 19, 2011 11:48 am

nuvolablu wrote:resolutions:

width:
320x
512x
640x
720x
960x
1024x
1280x

height
both 16/9 and 4/3 for each resolution...
320 x (320/16*9) and 320 x (320/4*3)
I never said that at all. What I'm getting at is what you have put in your post about 320 x (320/16*9) <- that's NOT standard resolution for widescreen.
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Sat Feb 19, 2011 11:51 am

If the width is changed then the height has to change in proportion. You can't alter one side, without it affecting the other.
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Sat Feb 19, 2011 12:52 pm

There are 5 main known standards for aspect ratio's if you check it on the link above.

4:3
3:2
16:9
1.85:1
2.39:1


Commonly used are 4:3 & 16:9 for regular or normal computer usage !
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

nuvolablu
User
Posts: 3
Joined: Wed Feb 16, 2011 9:39 pm

Re: DEFAULT LIST RESOLUTION

Post by nuvolablu » Sat Feb 19, 2011 1:22 pm

Fortra wrote:
nuvolablu wrote:resolutions:

width:
320x
512x
640x
720x
960x
1024x
1280x

height
both 16/9 and 4/3 for each resolution...
320 x (320/16*9) and 320 x (320/4*3)
I never said that at all. What I'm getting at is what you have put in your post about 320 x (320/16*9) <- that's NOT standard resolution for widescreen.
ah no??
320x180 and 320x240 are resperctively 16:9 and 4:3 aspect ratio (square pixel).
I hope this can help to understand.
Best regards.
S.

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Wed Feb 23, 2011 8:30 am

Give the new release version a try and see how it performs.
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Tue Mar 22, 2011 8:12 am

More improvements will be coming soon! :wink:
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Mon May 02, 2011 5:29 pm

Please check with in the "blog" section for additional information about changing and selecting splitcam resolutions that is available. You can also alter the colour independant controls,brightness,contrast, within this mode :P
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: DEFAULT LIST RESOLUTION

Post by Fortra » Tue May 03, 2011 7:46 am

You have the ability to alter some of the settings if you choose to do so. The default button is there to restore everything back to default.
Attachments
Colour+Brightness.png
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

sd778
User
Posts: 1
Joined: Wed Nov 27, 2013 9:12 am
Contact:

Re: DEFAULT LIST RESOLUTION

Post by sd778 » Wed Nov 27, 2013 9:20 am

720 and 1080 is much popular now a days. With high resolution and better results.

vicul
Forum Moderator
Posts: 200
Joined: Wed Oct 23, 2013 10:07 am

Re: DEFAULT LIST RESOLUTION

Post by vicul » Wed Nov 27, 2013 11:25 am

sd778 wrote:720 and 1080 is much popular now a days. With high resolution and better results.
But not all users have a powerfull PC for those resolutions
SplitCam Team

Gennadiy
User
Posts: 1
Joined: Mon May 26, 2014 9:12 am

Re: DEFAULT LIST RESOLUTION

Post by Gennadiy » Mon May 26, 2014 9:31 am

Hello.
May name is Gennadiy.
I use the SplitCam for video transmission from a capture device to a virtual webcam, it works.
I have a problem!
Video source resolution is 1920x1080 (60fsp).
SplitCam incorrectly determines resolution video source. Because of this, the image is distorted.

This problem has a different PC.

How to adjust the resolution of the video signal for entering SplitCam? :?: :?:

I hope for your assistance.

pc:
CPU – i5 4570 3200Mgz
Ram – 8gb Corsair 1333
VGA – GTX660 2gb
Motherboard – MSI H81I
OS - Win 7 pro

vicul
Forum Moderator
Posts: 200
Joined: Wed Oct 23, 2013 10:07 am

Re: DEFAULT LIST RESOLUTION

Post by vicul » Mon May 26, 2014 3:16 pm

Hi,

can you send me a sample of that video for test in our lab?

PS. if you wish, you can do it via PM.

Victor
SplitCam Team

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests