actskn43.ocx

Post your SplitCam questions and bug reports here. PLEASE WRITE ONLY IN ENGLISH !
technocrate
User
Posts: 4
Joined: Mon Feb 06, 2012 8:23 pm

Re: actskn43.ocx

Post by technocrate » Thu Feb 09, 2012 7:43 am

Actually seem working, tnx.

denis.omsk
User
Posts: 2
Joined: Fri Feb 10, 2012 4:22 pm

Re: actskn43.ocx

Post by denis.omsk » Fri Feb 10, 2012 4:26 pm

SPLITCAM SUPPORT wrote:To all who had problems with actskn43.OCX or ffdshow (video files) please download
Thanks, works, can you add to this version audio support like SplitCam 5.5 BETA (audio support)?

User avatar
SPLITCAM SUPPORT
Site Admin
Posts: 120
Joined: Sat Jul 16, 2005 7:34 am
Contact:

Re: actskn43.ocx

Post by SPLITCAM SUPPORT » Fri Feb 10, 2012 6:23 pm

Hello Denis
We add audio in 1-2 weeks , audio will be certificated by Microsoft and will be work on Win/Vista/Xp 32/64 bit.

Thank You

denis.omsk
User
Posts: 2
Joined: Fri Feb 10, 2012 4:22 pm

Re: actskn43.ocx

Post by denis.omsk » Sat Feb 11, 2012 3:51 am

And one more question, what about using as source IP cameras without webcam or any other software? I'm ready to pay (and I did it :) but I need all in one software. Thanks.

anonushka
User
Posts: 2
Joined: Sun Dec 18, 2011 12:28 pm

Re: actskn43.ocx

Post by anonushka » Mon Feb 13, 2012 9:21 pm

ver. 5.4.4.2
Installs with an actskn43.ocx error
during installation:
Image

After splitcam have been installed and upon launch appears an error:
Image

it won't open program, just closes the program.

Secondly.
I tried to install
http://splitcamera.com/SplitCamSetup_v5.4.5.8.exe
it seemed ok, although Windows complained about driver signature therefore wouldn't install it, but the program after installation was able to run.

Windows 7 x64 English here.//desmond

technocrate
User
Posts: 4
Joined: Mon Feb 06, 2012 8:23 pm

Re: actskn43.ocx

Post by technocrate » Tue Feb 14, 2012 3:08 pm

I guess, the answer it's already written in the previous posts.

mbatiri
User
Posts: 12
Joined: Tue Feb 07, 2012 12:47 pm

Re: actskn43.ocx

Post by mbatiri » Wed Feb 15, 2012 6:58 am

Hi again :(
I downloaded your beta version and tested it. There is no more .ocx error and also we can display any picture and video and desktop on splitcam screen. :)
But there is important problem with USB A4TECK camera (webcam). :cry:
When I select this camera as video source, camera's led lights few seconds and then turns off and only black screen shows in splitcam. Camera is plug and play and so hasn't any setting. I changed splitcam resolutions but the result was same. :!:
Would you please let's know what settings I should do to capture webcam video?:?:

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: actskn43.ocx

Post by Fortra » Wed Feb 15, 2012 7:25 am

mbatiri wrote:Hi again :(
I downloaded your beta version and tested it. There is no more .ocx error and also we can display any picture and video and desktop on splitcam screen. :)
But there is important problem with USB A4TECK camera (webcam). :cry:
When I select this camera as video source, camera's led lights few seconds and then turns off and only black screen shows in splitcam. Camera is plug and play and so hasn't any setting. I changed splitcam resolutions but the result was same. :!:
Would you please let's know what settings I should do to capture webcam video?:?:
hi mbatiri,

The only reason why your having that problem. Is because you haven't installed that webcam driver for that exact model device onto your system. Without the driver, your camera won't work!

Do you have a CD disc that should have came with that webcam?

If you don't have a CD disc for it. You can have a look on their website for that exact model webcam and download the driver for that webcam directly, click on the link below.

Their Website Link Here > A4Teck Webcams
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

mbatiri
User
Posts: 12
Joined: Tue Feb 07, 2012 12:47 pm

Re: actskn43.ocx

Post by mbatiri » Wed Feb 15, 2012 9:20 am

Hi Fortra
Thank you very much for your response.
My webcam hasn't any disk for driver and my win7 64bit has been installed driver because I can use it in messenger programs or I can see its video on Blaze HDTV player.
Is it enough or Splitcam need any other driver?

Chus7000
User
Posts: 1
Joined: Wed Feb 15, 2012 12:57 pm

Re: actskn43.ocx

Post by Chus7000 » Wed Feb 15, 2012 1:17 pm

thanks your answer helped me a lot, I had problems with the ocx

and a question

as I can I remove advertisements myfreecam?
SPLITCAM SUPPORT wrote:To all who had problems with actskn43.OCX or ffdshow (video files) please download our new version and inform us if the problem persist : http://www.splitcamera.com/SplitCamSetup_beta.exe

destrecht
User
Posts: 1
Joined: Wed Feb 15, 2012 2:38 pm

Re: actskn43.ocx

Post by destrecht » Wed Feb 15, 2012 2:41 pm

I just tried the version you suggested in Windows 7, and with the exception of Windows complaining :lol: :D about an unsigned driver- it works like a champ!

mbatiri
User
Posts: 12
Joined: Tue Feb 07, 2012 12:47 pm

Re: actskn43.ocx

Post by mbatiri » Fri Feb 17, 2012 5:15 am

Is there any body help me??? :cry:

User avatar
SPLITCAM SUPPORT
Site Admin
Posts: 120
Joined: Sat Jul 16, 2005 7:34 am
Contact:

Re: actskn43.ocx

Post by SPLITCAM SUPPORT » Fri Feb 17, 2012 5:20 am

Hello mbatiri
Can you tell me if in old versions your camera was work or had same problem ?

And again , Big Thanks for your translation ! :)
mbatiri wrote:Is there any body help me??? :cry:

mbatiri
User
Posts: 12
Joined: Tue Feb 07, 2012 12:47 pm

Re: actskn43.ocx

Post by mbatiri » Fri Feb 17, 2012 8:31 pm

Thanks a lot for your reply
About one years ago, I used splitcam and had no problem but I don't know what was its version.
In early versions I have problem, first was .ocx and now is DARK SCREEN!!!

User avatar
Fortra
Profi User
Posts: 485
Joined: Mon Feb 07, 2011 1:00 pm
Location: United Kingdom

Re: actskn43.ocx

Post by Fortra » Fri Feb 17, 2012 9:07 pm

Hi again mbatiri,

1. It seems that you have two issues, you mentioned in your post, you said that you can see your webcam video in messenger (which version of messenger is it Windows Live Messenger or Yahoo)?

2. That software program Blaze HDTV player. Is that there to be used with your pre-installed TV card if you have one, inside your Win7 x64 bit computer. The reason I'm asking is because I have had a look on that Blaze HDTV program website and it say's that their software has TV/TeleText capabilities as well as digital TV reception standards?

P.S ... Is your system a Laptop or Desktop pc?
mbatiri wrote:Hi Fortra
Thank you very much for your response.
My webcam hasn't any disk for driver and my win7 64bit has been installed driver because I can use it in messenger programs or I can see its video on Blaze HDTV player.
Is it enough or Splitcam need any other driver?
@ USERS, NO BS - PLEASE USE ONE OF THE EXISTING APPROPRIATE TOPIC THREAD WHEN POSTING ANY OF
YOUR QUESTIONS ON HERE... BY USING THE BRIGHTLY
LIT AND NOTICEABLE (POST REPLY) GREEN BUTTON
FOLLOW ARROW DIRECTION BELOW.

<|==<<<

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 30 guests