IMPORTANT INFORMATION !

[matthewmason1]

I've done a few test recordings of my desktop, but each time there is not audio in the playback. I have a PC using Windows 7 with an integrated Mic and Webcam. I also have an external lapel mic, but isn't being discovered by SplitCam. In the "File" drop down menu, nothing happens when I click on Audio Source.

I also have made sure the audio volume slider is all the way up and not muted. Is this a known bug or what do I have to do to get the audio recording along with my desktop screen capture?

I just installed this software today from the home page so I imagine it's the latest version. Mine says V 5.4.6.0

Thanks.

- Matt

[Fortra]

@ matthewmason1,

What version of Win7 is it, 32 or 64bit ?

[matthewmason1]

64.

[Fortra]

@ matthewmason1,

Well in that case I would recommend that you use the latest splitcam BETA version that works on both 32/64bit of Windows OS. Audio is supported in this version, Click on the link below it will take you to beta thread to where its located.

Splitcam Beta version

Once you have installed the beta version I would also recommend that you have a careful look around on the forum too. There are some valuable info threads that will have some tips that will help understand a bit better how to use the program.

And finally you will come across a thread called AUDIO ISSUES WITH SPLITCAM! < Manually look down the various Topic list of threads!

[matthewmason1]

Thank you for your response. You know I tried to do a search with your search function in a number of ways and it kept returning no results. So, I manually went through as much as I could. Based on the date of the posts I thought the "Beta" version was an older version.

Thanks again, though. I'll try this out.

[Fortra]

For Everyone !

P.S - When I say to "MANUALLY LOOK" I mean just do like you would do if you were looking in any regular book index page, or a phone book directory. Don't rely on this forum search feature it's useless !

If you look down at the bottom of the current page your looking at. You will see Page # (numbers) with your cursor just click on #2 it will take you directly to that Page #, then scroll down and you will come across a post that I had done with an attachment simplified picture diagram explaining how this forum basic layout work.

[rtiirii]

I suggest you READ what is already available information before I make any further comment!

BTW, why cover up your splitcamera video window, if your camera wasn't working with the latest version, as you say in your post above?

From what I observe splitcamera has detected your camera driver. So maybe your system might be too old or might also not been kept up to date with the OS update in the first place, might also be full of out dated program software too.


------------------------------

Sacs Longchamp Pas Cher

[Fortra]

I merely meant it towards some users, that in some cases they might not understand why they can't get their own system to work properly for some strange reason that they might be experiencing some sort of issue.

[Fortra]

For Everyone!

A basic simplified functionally explanation of what is the primary usage of splitcam is used for, by a splitcam user.

It gives the user the ability to share their webcam live stream within multiple video reliant chat programs. So if you intend to split the video to four sites for example, then those sites will each, get the same video between them once you have configured those sites to use splitcam capture driver as their source.

[Fortra]

For Everyone!

I have updated the bug list on (PAGE 1) the very 1st post, of this thread check it out and read carefully!

[Sapaman]

Help me. I am looking for version splitcamera 4.2 that works on Windows 7 64 bit. I installed splitcamera 4.2 but it gives me an error when I start the program. I only need version 4.2 because I am used to.
Thanks

[Fortra]

@ Sapaman,

There is only support on here for the NEW SPLITCAM VERSION ONLY!

[Fortra]

Here is some Good News update!

For those users that use Google+ Hangout. Splitcam does now work and is detected in Google+ Hangout and SKYPE v6.x.x.x However, it's VERY IMPORTANT that you install and use the "LATEST UPDATED BETA SPLITCAM VERSION" for it to work!

P.S- Remember, you have to uninstall first, any previous version of splitcam. Then reboot your system, then install the latest new BETA version onto your system!

( Click on the picture below if you want to view it in more closer detail within your own browser )

[Fortra]

For everyone!

Please check and read carefully within the topic's various available threads, that are their for your own benefit to read in your own time!

They will have some valuable information posts & tips within them!

[Fortra]

For Everyone!

The SplitCam bug list post has now been updated with new info!

Please read and check it out!

On there you'll find the bug list post on (Page 1) on this thread!